COOLEX series cooling units ensure that products exiting the extruder and molding system are cooled at an optimum speed and homogeneously, allowing them to maintain their final geometric form.
In various raw materials and processes, it increases dimensional stability and minimizes the risk of deformation by providing thermal balance on both the internal and external surfaces of the product.
COOLEX STANDARD COOLING UNIT
It is used in all process applications that do not require calibration.
STANDARD FEATURES
- Effective cooling length options between 1m and 15m depending on the process.
- Cooling unit width between 100mm-800mm depending on product dimensions.
- Forward and backward movement capability (±200mm)
- Up-down movement capability (±150mm)
- Roller system for product flow.
- Belt conveyor system for product flow (in COOLEX-B series)
- Stainless steel pool and plumbing equipment
- Level-controlled stainless steel tank, pump, and filter equipment.
- Control systems equipped with heat exchangers and temperature measuring devices.
- Effective spray nozzle systems throughout the pool
- Pneumatic air blowing systems
- Water flow rate and measurement systems (Optional)
COOLEX-V VACUUMED COOLING UNIT
It is used in applications involving hoses, tubes, etc., that require calibration.
STANDARD FEATURES
- Effective cooling length options between 1m and 15m depending on the process.
- Cooling unit width between 100mm-800mm depending on product dimensions.
- Forward and backward movement capability (±200mm)
- Up-down movement capability (±150mm)
- Vacuum calibration system
- Vacuum reduction tank, pump and gauge
- Roller system for product flow.
- Belt conveyor system for product flow (in COOLEX-B series)
- Stainless steel pool and plumbing equipment
- Level-controlled stainless steel tank, pump, and filter equipment.
- Control systems equipped with heat exchangers and temperature measuring devices.
- Effective spray nozzle systems throughout the pool
- Pneumatic air blowing systems
- Water flow rate and measurement systems (Optional)
COOLEX-C CALIBRATED COOLING UNIT
Used in profile applications requiring advanced calibration.
STANDARD FEATURES
- Effective cooling length options between 2m and 4m depending on the process.
- Cooling units width between 100mm-400mm depending on product dimensions.
- Forward and backward movement capability (±200mm)
- Up-down movement capability (±150mm)
- Left-right movement capability (±100mm)
- Vacuum calibration system
- Vacuum reduction tank, pump and gauge
- Roller system for product flow.
- Belt conveyor system for product flow (in COOLEX-B series)
- Stainless steel pool and plumbing equipment
- Level-controlled stainless steel tank, pump, and filter equipment.
- Control systems equipped with heat exchangers and temperature measuring devices.
- Effective spray nozzle systems throughout the pool
- Pneumatic air blowing systems
- Motor-driven forward and reverse movement system (Optional)
- Water flow rate and measurement systems (Optional)